V-Head Jack Stand (2,500lbs Capacity)

Quick Slip Tube Adjustment

Fine Screw Adjustment

Adjusting Screw 1 3/8"-5" Pitch Full Acme Thread

"T" Handle Lock For Slip Tube ½"-13 Thread

Adjusting Nut Length 1 to 1½" With Balance Ball Ends For Easy Adjusting

Certified Testing By Independent Source

All Stands Have Safety Instructional Label & Load Capacity Label With 2 to 1 Safety Factor

'V' On The V-Head Jack Stand Made From 3/8" x 2½" HR Bar

Bases Accept: V-Head, Roller Head, Transfer Ball & Bar Stock Roller Head

Built In Stop For Slip Tube To Prevent Injury

Washer Face On Slip Tube For Smoother Screw Adjustment

Legs Are 1" Square Tube 16 Gauge Wall Thickness

All Legs Have 2" Diameter Foot Surface

Safety Washer Retainer Finger Formed From 12 Gauge Steel Sheet

Safety Washer Has "EZ" Lift Release Tab

Safety Washer Has Retainer Pin To Prevent Loss Of Washer

Safety Washer "Fall Proof" Design Prevents Slippage Prior To Tightening "T" Handle

V-Head Painted With High Visibility Yellow Paint

V-Head Will Accept Work Piece Up To 12" Diameter

Working Load Capacity For V-Head Jack Stands Is 2,500 LBS